
Manual and Robotic Welding
Manual and robotic welding of steel, stainless steel and aluminium, certified to ISO 3834-2, by 50+ qualified welders and 9 robots. Every weldment comes with qualified welders, qualified procedures and records your quality team can audit.
Manual welding
50+ qualified welders
For one-off parts, parts welded without a jig and large production runs alike.



- Feature
50+ certified welders
BenefitEvery weld on your part is made by a qualified welder, and the qualification can be shown to your quality team.
ProofEN ISO 9606
- Feature
TIG and MIG/MAG on steel, stainless steel and aluminium
BenefitSteel, stainless and aluminium weldments come from one supplier instead of one specialist per material.
- Feature
One-off precision parts welded without a jig
BenefitPrototypes and small batches are welded without waiting for, or paying for, a dedicated jig.
Robotic welding
9 welding robots
For series where the same weld must be repeated part after part.
- Feature
Robotic welding cells from Fanuc, IGM and Yaskawa
BenefitProgrammed weld paths repeat identically from part to part, so seam position and size stay the same across the series.
Proof9 robots
- Feature
Parts up to 4000 × 1000 mm and 3 t
BenefitLarge frames and chassis are robot-welded too, not only small brackets.
Welding jigs and fixtures
Designed and built in-house
For series that need every part clamped the same way.

- Feature
Welding jigs and fixtures designed and built in-house
BenefitEach part is clamped in the same position, so dimensions repeat across the series, and jigs follow your design changes without an outside toolmaker.
Proof8 engineers
- Feature
Jig design included in industrialisation
BenefitThe jig is designed together with the production plan and the PPAP file, so it is ready when serial production starts.
ProofPPAP
Welding certifications and standards
ISO 3834-2, EN ISO 9606, EN ISO 15614
For quality teams who need to audit how a weld was made.
- Feature
Certified welding quality system
BenefitWeld quality is managed under a recognised standard that your supplier audit can refer to.
ProofISO 3834-2
- Feature
Welders qualified to EN ISO 9606, procedures to EN ISO 15614
BenefitEach weld traces back to a qualified welder and a qualified procedure, ready for your PPAP or first-article file.
ProofWPS / WPQR
- Feature
1 resident welding engineer
BenefitYour engineers get answers on weld design from the plant itself, and procedures are set and checked on site.
- Feature
Periodic requalification of welders and procedures, periodic external audits
BenefitQualifications stay valid over the life of your programme, not only at first approval.
Frequently asked questions
Which welding processes and materials do you work with?
TIG and MIG/MAG welding, manual and robotic, on steel, stainless steel and aluminium: one supplier for all three materials.
Are your welders and procedures certified?
Yes. Our welding is certified to ISO 3834-2, our welders are qualified to EN ISO 9606 and our procedures to EN ISO 15614, with a resident welding engineer, periodic requalification and external audits. Your quality team can audit each of these records.
What size of parts can your welding robots handle?
Our 9 welding robots (Fanuc, IGM, Yaskawa) weld parts up to 4000 × 1000 mm and up to 3 t, so large frames can be robot-welded too.
Do you make your own welding jigs?
Yes. We design and build our welding jigs and fixtures in-house for each project, so every part in a series is clamped the same way.
