
Milling / Boring / Turning
Milling, boring and turning of your weldments after welding, on boring mills up to 10 m. Your welded parts are machined in-house, with no trip to an outside machine shop, and reach you finished to print.
Large milling and boring
Milling and boring up to 10 m
For heavy welded frames and chassis whose bores and faces must be machined after welding.



- Feature
2 five-axis boring mills, Pama and CMF
BenefitBores and mounting faces are machined after welding, so weld distortion no longer affects the final dimensions.
Proof10 m
- Feature
Milling and boring up to 10 m
BenefitLong welded frames are machined whole, instead of being split into sub-parts to fit a smaller machine.
Proofup to 5 t
- Feature
Welding and machining under one roof at Aries2
BenefitOne supplier and one quality system from plate to machined weldment: no hand-over between a welding shop and a machine shop.
ProofISO 9001 · ISO 3834-2
Medium-size milling
Milling and boring up to 4 m
For mid-size components and the machined parts that go into your assemblies.

- Feature
4 five-axis milling machines: 2 Doosan, 1 Pinnacle, 1 Lagun
BenefitSeveral faces are machined in one clamping, so features on different sides stay aligned to each other.
ProofTable 3000 × 1500 mm
- Feature
Components up to 3000 mm and 1 t
BenefitMid-size parts run on machines sized for them, which leaves the large boring mills free for heavy weldments.
Turning
Turning up to 3 m
For the shafts and pins that fit into your welded assemblies.
- Feature
3 lathes: 2 Pinnacle, 1 AEWA
BenefitShafts and pins are turned in-house: one supplier for the weldment and for the parts that fit into it.
Proofup to 3 m
Frequently asked questions
What size of parts can you machine?
Up to 10 m in milling and boring on our 5-axis Pama and CMF boring mills, up to 3000 mm and 1 t on our medium machining centres, and up to 3 m in turning. Large and small parts of one assembly can come from the same supplier.
Do you machine weldments after welding?
Yes. Large and complex welded components are machined after welding in our own machining line, so the final dimensions are cut after any weld distortion and the part ships finished.
How many machining centres do you have?
Our machining line has 10 machines: large 5-axis boring mills (Pama, CMF), 5-axis milling machines (Doosan, Pinnacle, Lagun) and turning machines (Pinnacle, AEWA). Each part goes to a machine sized for it.
