3 SITES IN PRODUCTION · FRANCE + SLOVAKIA
Painter in protective suit powder coating a yellow steel frame
09 / Finishing

Painting and Surface Treatment

Powder coating and liquid painting in-house, plus cataphoresis, galvanizing, electro-zincing and electro-polishing through specialised partners near each site. Your parts leave us finished and protected, with no separate paint supplier for you to manage.

3
Powder coating lines
1
Liquid painting booth
6 × 2.5 m
Max. powder coating size
12 × 5 m
Max. liquid painting size
01 / Finishing

Powder coating

3 powder coating lines

For series parts and assemblies that need an even, durable finish in standard or custom colours.

Grey painted sheet-metal enclosures, film-wrapped and ready for dispatch
  • Feature

    3 powder coating lines, robotic and manual booths

    Benefit

    Series parts get a repeatable, robot-applied coat; complex or one-off parts are finished by hand.

  • Feature

    Parts up to 6000 × 2500 mm and 3 t

    Benefit

    Large welded frames are coated whole, after welding, not in pieces.

  • Feature

    Standard and custom colours: anti-rust, anti-graffiti, textured, matt, gloss

    Benefit

    The finish is matched to your specification without a second paint supplier.

  • Feature

    Powder: less waste and fewer emissions than conventional wet paint

    Benefit

    An even coat that resists scratches, corrosion and fading, with a smaller environmental footprint in your supply chain.

    Proof

    ISO 14001

  • Feature

    Automated and manual shot blasting

    Benefit

    Surfaces are prepared in-house before coating, without sending parts out for blasting.

02 / Finishing

Liquid painting

1 liquid painting booth

For very large parts and assemblies, and for specific colour matches.

Batch of green powder-coated steel brackets on a pallet
  • Feature

    1 liquid painting booth for parts up to 12000 × 5000 mm

    Benefit

    Assemblies too large for the powder lines are still painted in-house.

    Proof

    up to 5 t

  • Feature

    Liquid paint applied by experienced painters

    Benefit

    Specific colour matches and finishes outside the powder range are available.

03 / Finishing

Cataphoresis (e-coating)

Specialised partners for each production site

For agricultural, industrial and structural parts that need e-coat corrosion protection.

Long steel arm with a uniform black cataphoresis (e-coat) finish on a pallet
  • Feature

    Cataphoresis lines of specialised partners near each site

    Benefit

    You order and receive the coated part from us, and the coater is close to the plant that makes it: one supplier, short transport.

    Proof

    4000 × 2000 mm · 1 t

04 / Finishing

Galvanizing

Specialised partners for each production site

For steel used outdoors or in harsh environments.

Hot-dip galvanised steel plate part on a workbench
  • Feature

    Galvanizing by specialised partners for each site

    Benefit

    A tough zinc coating protects outdoor and structural steel, ordered together with the part from one supplier.

    Proof

    12000 × 5000 mm · 5 t

05 / Finishing

Electro-zincing and electro-polishing

Specialised partners for each production site

For small zinc-protected components and for stainless parts that must stay clean.

Long zinc-plated steel profile on a pallet
  • Feature

    Electro-zincing through partners

    Benefit

    An even, corrosion-resistant coating on small and medium-size components, ordered together with the parts.

  • Feature

    Electro-polishing of stainless steel through partners

    Benefit

    A smoother, cleaner surface for hygiene-sensitive applications.

FAQ

Frequently asked questions

What size and weight of parts can you powder coat?

Up to 6000 × 2500 mm and 3 t, on 3 powder coating lines with robotic and manual booths: large welded frames are coated in one piece.

Can you paint very large parts?

Yes. Our liquid painting booth takes parts and assemblies up to 12000 × 5000 mm and 5 t, so very large assemblies are painted in-house.

Do you offer cataphoresis and galvanizing?

Yes, through specialised partners for each production site: cataphoresis up to 4000 × 2000 mm and 1 t, galvanizing up to 12000 × 5000 mm and 5 t. You order and receive the finished part from us.

Which colours and finishes are available?

Standard and custom colours, with properties such as anti-rust, anti-graffiti, textured, matt or gloss, matched to your specification.

Have a drawing? We'll tell you exactly how we'd make it.