
Bending / Rolling / Pressing
Bending, rolling and pressing under one roof, from 0.5 mm sheet to thick plate: your formed parts go straight to welding without leaving the plant.
Bending
Complex shapes, repeatable results
With 11 press brakes, including cells with automatic tool change, we handle complex forming as well as large series.



- Feature
11 press brakes, 50 to 350 t, cells with automatic tool change
BenefitSet-ups are prepared offline, so small batches and repeat orders come out identical without long changeovers.
Proof11 machines · 50–350 t
- Feature
4 m on one machine, 11 m with two in tandem
BenefitLong members are bent in one piece: no welded joint to design, inspect or pay for.
Proof11 m
- Feature
Gooseneck tooling with 300 mm clearance
BenefitDeep U-channels and closed profiles are formed without splitting the part.
Proof300 mm
- Feature
150+ tool sets in stock
BenefitUnusual radii and flanges are covered by existing tools, without waiting for new tooling.
Proof150+ tool sets
Rolling
Cylindrical rolling for your projects
We roll plate up to 25 mm thick, down to an inner diameter of 200 mm.



- Feature
3 plate rolling machines
BenefitCylinders and arcs are rolled in-house, next to cutting and welding, with no subcontracted step in between.
Proof3 machines
- Feature
Plate up to 25 mm, formats up to 4000 × 500 mm
BenefitStructural shells and heavy rings come from the same supplier as the rest of the assembly.
Proof25 mm · 4000 × 500 mm
Pressing
Beyond 25 mm with a 500 t press
For heavy plate or forming that needs a larger radius than a press brake can give, we use a 500 t hydraulic press.



- Feature
500 t Muller hydraulic press
BenefitPlate too thick or radii too large for a press brake are still formed in-house.
Proof500 t
- Feature
Parts up to 1000 × 1000 mm
BenefitHeavy formed plates join the same production flow as your welded assemblies.
Proof1000 × 1000 mm
Frequently asked questions
What is the maximum bending length and force?
Up to 4 m on a single press brake and 11 m with two machines in tandem, with forces from 50 t to 350 t.
What thickness can you roll?
Plate up to 25 mm thick, in formats up to 4000 × 500 mm, down to an inner diameter of 200 mm.
Can you form plate thicker than 25 mm?
Yes. Thick plate and large-radius shapes are formed on our 500 t hydraulic press, for parts up to 1000 × 1000 mm.
